Technological advancements have made driving a safer and more pleasant experience. Have you ever seen the Lexus “BSM” light on your dashboard? If so, what did you do about it?
BSM stands for Blind Spot Monitor, The BSM system uses radar sensors to detect vehicles approaching from the rear or the side. When a vehicle is detected, the system will illuminate a warning light on the appropriate side of the car.
In this article, I will explain what the BSM light means, what it does, and how to enable and disable it. Keep reading for more information.
What Does the Lexus BSM Light Mean?
BSM stands for “Blind Spot Monitor.” This system is designed to help drivers avoid accidents by alerting them to the presence of other vehicles in their blind spot.
When the BSM light is illuminated, the system is activated and working properly. There is no need to take any action if you see this light. If the light blinks, the system has detected a vehicle in your blind spot. You should check your mirrors and make sure it is safe to change lanes.
How To Enable & Disable Lexus BSM
Different Lexus models have different methods for enabling and disabling the BSM system. Consult your owner’s manual for specific instructions.
There are two main ways of enabling and disabling the system:
- The MID and steering controls
- BSM button
Read on as I give a detailed guide on the two ways and the different models.
The Multi-information Display and Steering Controls
You can use your steering wheel controls to toggle over the MID settings. Then, use the arrow keys to scroll down the list until you find the BSM setting.
Once you’ve found it, press the “OK” button to enter the menu. From here, you can use the arrow keys to enable or disable the system. Press the “OK” button to save and exit after making your changes.
The models that use this feature include Lexus GS, LX, and RX.
The BSM Button
Most models will have a dedicated BSM button that you can use to enable and disable the system. In most Lexus models, you can find the button near the top of the center console or inside the driver’s door, just to the left of the steering wheel.
Pressing and holding this button will turn the system on or off. You can tell if the system is on or off by looking at the BSM light on your dash. If it’s illuminated, then the system is on.
The models that use this feature include Lexus IS, GX, NX, RC, ES, and LS.
Whichever way your car enables and disables the BSM system, the process is pretty similar. Make sure there is a green “BSM” light on your dash, and you’re good to go.
When To Use the Lexus BSM Light
The BSM system is designed to help drivers avoid accidents. However, it is not a replacement for paying attention to your surroundings.
Here are some instances that necessitate the use of the BSM light:
It is always important to check your mirrors and blind spot before changing lanes. The BSM system can help you by illuminating the light when a car is in your blind spot.
The BSM system can be helpful when parking in tight spaces. It will illuminate the light if a car approaches from the rear or side.
Driving at Night
The BSM system can help you see other cars on the road, even if they are not using their headlights. This is especially helpful when driving on dark roads or in foggy conditions.
You can tell if the system is working properly by looking at the BSM light on your dash. If it’s illuminated, then the system is on.
The Lexus BSM light is a helpful feature that can prevent accidents. It’s important to know how to enable and disable the system, as well as when to use it. I hope this guide has helped you learn more about the BSM system and how it works.
1 thought on “Lexus BSM Light [Meaning, What It Does, How to Turn On & Off]”
DOES THE bsm SYSTEM HAVE AN AUDIO SETTING AS WELL AS THE ILLUMINATION DISPLAY IN THE OUTSIDE MIRRORS?